|
|
Upper gearshift lever boot - 13275305
Upper gearshift lever boot
|
|
Upper gearshift lever boot Balilla 4 M - 12095305
Upper gearshift lever boot Balilla 4 M
|
|
Upper gearshift lever boot, spherical - 13205305
Upper gearshift lever boot, spherical
|
|
Upper surface door gaskets - 13230173
Upper surface door gaskets
|
|
Upper suspension rebuild kit, NOS, complete with new... - E0256X
Upper suspension rebuild kit, NOS, complete with new A arm supports, bushings, seals, brass washers, and nuts; kit is for both sides. Specify if A arm supports stand alone or are connected. Verify the diameter of bolts that pass through chassis to hold in place.
|
|
Upper transmission boot - 13280306
Upper transmission boot
|
|
Upper transmission lever boot, 1st series - 13200305
Upper transmission lever boot, 1st series
|
|
Upper transmission lever boot, 1st series - 13270305
Upper transmission lever boot, 1st series
|
|
Upper transmission lever boot, 2nd series - 13270306
Upper transmission lever boot, 2nd series
|
|
Use #15300001 - 15319001 See 15300001
Use #15300001
|
|
Use #15300001 - 15319002 See 15300001
Use #15300001
|
|
Use #15300001 - 15320001 See 15300001
Use #15300001
|
|
Use #15300001 - 15320002 see 15300001
Use #15300001
|
|
Use #15300001 - 15322001 See 15300001
Use #15300001
|
|
Use #15300001 - 15322002 See 15300001
Use #15300001
|
|
Used, chrome pinch weld along the carpet, right sid... - B078
Used, chrome pinch weld along the carpet, right side
|
|
Valance edging, at lower edge of rear body. Push-on... - 16316195
Valance edging, at lower edge of rear body. Push-on PVC vinyl trim, textured pattern.
|
|
Valance, lower rear, stamped steel, factory style... - BE1050S
Valance, lower rear, stamped steel, factory style part between body seams on rear fenders, from trunk opening to bottom of car. A terrific piece.
|
|
Valence edging, at lower rear edge of body. Push-on... - 16316194
Valence edging, at lower rear edge of body. Push-on PVC vinyl trim, original style, skinny rib style. Profile 105, 2.2 mt. Textured version: 16316195.
|
|
Valve adjusting shims, 8mm, for 750 motors and GTA... - E0161X
Valve adjusting shims, 8mm, for 750 motors and GTA.
|
|
Valve cam follower, screws into valve stem, valid... - E0208XC
Valve cam follower, screws into valve stem, valid for intake or exhaust
|
|
Valve cover gasket for 1600 engine only - E006
Valve cover gasket for 1600 engine only
|
|
Valve cover gasket for Alfa 2600, all 1950-60 Models... - E0489X
Valve cover gasket for Alfa 2600, all 1950-60 Models. Molded rubber as original. A pretty cool 2 piece kit.
|
|
Valve cover gaskets, Giulietta cars, 1st series. ... - E0445
Valve cover gaskets, Giulietta cars, 1st series. (750) These are narrower than the 101 series.
|
|
Valve cover gaskets, Giulietta cars, 2nd series. ... - E0446
Valve cover gaskets, Giulietta cars, 2nd series. For 101 series.
|
|
Valve cover nuts with black Bakelite outer ring, Alfa... - E0086X
Valve cover nuts with black Bakelite outer ring, Alfa Romeo script as original, new manufacture, uses 14mm hex wrench, Giulietta 1300 & Giulia 1600 only
|
|
Valve cover nuts, OEM, round style, serrated outside... - E0086XC
Valve cover nuts, OEM, round style, serrated outside edge
|
|
Valve cover nuts, Veloce only, chromed thin, serrated... - E0086XB
Valve cover nuts, Veloce only, chromed thin, serrated edge, no Bakelite border on Veloce models, includes gasket and retaining clip
|
|
Valve guide, 8mm stem, 750 only. - E0100XB
Valve guide, 8mm stem, 750 only.
|
|
Valve spring, pressure release valve spring, new... - E130
Valve spring, pressure release valve spring, new manufactured
|
|
Valve springs, complete set of 16 pieces, specify... - E0208XD
Valve springs, complete set of 16 pieces, specify diameter specify diameter and if for a Veloce or not
|
|
Valves, exhaust, 8mm stem, 750 only - E0085X
Valves, exhaust, 8mm stem, 750 only
|
|
Valves, exhaust, NOS, specify head and stem diameter... - E0085XC
Valves, exhaust, NOS, specify head and stem diameter, 2000 c.c. cast iron block only
|
|
Valves, exhaust, NOS, specify head and stem diameter... - E0085XE
Valves, exhaust, NOS, specify head and stem diameter, 2600 only
|
|
Valves, exhaust, NOS, specify head and stem diameter... - E0085XG
Valves, exhaust, NOS, specify head and stem diameter, Montreal only
|
|
Valves, exhaust, NOS, specify head diameter, style... - E0208XE
Valves, exhaust, NOS, specify head diameter, style with hollow threaded stem, includes adjuster top
|
|
Valves, intake, new manufacture, 8mm stem, 750 onl... - E0100X
Valves, intake, new manufacture, 8mm stem, 750 only
|
|
Valves, intake, NOS, specify head and stem diameter... - E0085XB
Valves, intake, NOS, specify head and stem diameter, 2000 c.c. cast iron block only
|
|
Valves, intake, NOS, specify head and stem diameter... - E0085XD
Valves, intake, NOS, specify head and stem diameter, 2600 only
|
|
Valves, intake, NOS, specify head and stem diameter... - E0085XF
Valves, intake, NOS, specify head and stem diameter, Montreal only
|
|
Valves, intake, NOS, style with hollow threaded stem... - E0208X
Valves, intake, NOS, style with hollow threaded stem, includes adjuster top, specify head diameter
|
|
Velvet cloth for soft tops. For edging where the... - U0010/SS
Velvet cloth for soft tops. For edging where the door windows roll up and touch the soft top.
|
|
Velvet cloth, red - U0010/KF2R
Velvet cloth, red
|
|
Velvet cloth, yellow - U0010/KF2Y
Velvet cloth, yellow
|
|
Vent glass for the Ferrari Dino 246 GTS. Please... - G020
Vent glass for the Ferrari Dino 246 GTS. Please specify whether , the glass has a hole for the latch or uses a glue in latch, also specify left or right side.
|
|
Vent window gasket for the 250 Lusso - 16308132
Vent window gasket for the 250 Lusso
|
|
Vent window gasket, front, factory molded one piece. Made in Italy- 16325130
Vent window gasket, front, factory molded one piece. Made in Italy
|
|
Vent window gasket, front, Ferrari Daytona, factory molded one piece. - 16320130
Vent window gasket, front, Ferrari Daytona, factory molded one piece. Made in Italy
|
|
Vent window gaskets for Grifo molded. - 70020130
Vent window gaskets for Grifo molded. - 70020130
|
|
Vent window knob for 2600 Spider - N0250
Vent window knob for 2600 Spider
|
|