|
Lights
Bulb holder, Bakelite, NOS, for headlight that require bulbs with 2 side pins, 2 wire.
|
Bulb holder, Bakelite, NOS, for headlight that require bulbs with 2 side pins, 3 wire.
|
Bulb holder, Bakelite, NOS, for headlight that require bulbs with 2 side pins, 4 wire.
|
Bulb, banana shaped bulb for engine compartment lights that function without a lens. These are 20 watt bulbs.
|
Bulb, driving light, Marchal or equivalent, NOS, 3 projections on side, single element, 45 watt, clear glass
|
Bulb, fog light, Carello style, no projections on side, metal disc seperating globe from base, single element, 45 watt, amber glass
|
Bulb, fog light, Marchal or equivalent, NOS, 3 projections on side, single element, 45 watt, amber glass
|
Bulb, fog light, Marchal or equivalent, NOS, 3 projections on side, single element, 50 watt, amber glass
|
Bulb, headlight, Marchal or equivalent, NOS, 3 projections on side, double element, 45/15 watt, amber glass
|
Bulb, headlight, Marchal or equivalent, NOS, 3 projections on side, double element, 36/45 watt, clear glass
|
Bulb, headlight, Marchal or equivalent, NOS, 3 projections on side, double element, 36/45 watt, amber glass
|
Bulb, headlight, Marchal or equivalent, NOS, 3 projections on side, double element, 45/40 watt, clear glass
|
Bulb, headlight, NOS, 3 projections on side, double element, 45/40 watt, amber glass
|
Bulb, headlight, NOS, H4 style, 3 spade terminals on base, 100/80 watt, relay required in system for extra wattage
|
Bulb, headlight, round globe style, 45mm diameter metal base functions as bulb holder, clear, 45/40w. Fits Carello headlights.
|
Bulb, headlight, style that fits in Bakelite bulb holder, 12V, 45/40
|
Bulb, headlight, with Bakelite bulb holder, specify bulb holder with or without parking light capability, a combination of L0240X and L0036X
|
Headlight adaptor, NOS, Carello, 6 long pigtail made of 3 wires with bullet connectors at one end and 3 prong Bakelite connectors at other end, for fitting to a more modern headlamp bulb with 3 spade terminals.
|
Headlight assembly with bucket and aluminum rim, has bolt in back to use in adjustment, small lens (approx. 5), mostly used in race cars\n
|
Headlight assembly, Carello, NOS, vertical ribs in glass style, includes parabola and NOS glass, 170 mm diameter
|
Headlight assembly, Marchal Equilux Type 485, vertical inside metal bar with Marchal crest at top, NOS restored
|
Headlight assembly, NOS, Carello, 00.508.700 on lens, early 50s style with vertical ribs. Valid for cars up through 1957.
|
Headlight assembly, NOS, Marchal Equilux Type 109, specify method used to adjust headlight
|
Headlight bucket for 60s vintage Marchal or Cibie headlights. This type of bucket is the one that accepts the headlight hold-in ring that houses the adjustment screws. The adjustment screw has a mushroom style head that snaps into a nylon receptacle in
|
Headlight glass only, Marchal Equilux Type 485.
|
Headlight hold-in ring. This 60s style ring has three tabs on the side , 120 degrees apart with a mushroom-headed screw that would snap into a nylon receptacle in the bucket lip. This holds the headlight in place.
|
Headlight lens, Carello, NOS, 150mm size. Style with vertical lines and a Carello emblem at the very bottom
|
Headlight parabola, small style.
|
Headlight rim, 8-3/8 OD, new manufacture, no Marchal script
|
Headlight rim, 8-7/8 OD, new manufacture, no Marchal script\n
|
|
|