|
Lights
Back up light lens, new manufacture, left side, goes on assembly that hangs down from bumper, clear
|
Back up light lens, new manufacture, left side, goes on assembly that hangs down from bumper, amber
|
Back-up light assembly, NOS, Carello, mounts under bumper, right side, #18.534.716 on lens
|
Back-up light assembly,Carello, new manufactured, lower body mount style, with gasket.
|
Back-up light assembly. A new manufacture of this hard to find part. Complete with new chromed base, new lens and new internal light bulb holder and reflector. Right side bottom front
|
Back-up light lens, NOS, Olsa.
|
Back-up light lens, NOS, specify left or right, fits assembly that hangs down from bumper.
|
Back-up light lens,Altissimo.
|
Back-up light lens,Carello.
|
Bezel for side marker lens and its holder. This normally sets into the fender, front or rear and holds the colored lens/reflector and its chromed plastic housing. Specify which fender, as when ordered separately, these are different for each fender.
|
Headlight assembly, NOS, Carello, #03.230.700 on lens, with bulb protector, 3 perch mount, H4 bulb style.
|
Headlight assembly, NOS, Carello, #03.239.700 on lens, with bulb protector, 3 perch mount, H4 bulb style.
|
Headlight assembly, NOS, Carello, #03.245.700 on lens, mounts with two brackets and a hook, H4 bulb style.
|
Headlight assembly, NOS, Carello, #03.245.700 on lens, with 3 perch mount, H4 bulb style.
|
Side marker light/reflector bezel for L0368XA, this is for the center light style.
|
License plate light, NOS, Carello, #10.508.716 on lens
|
Outer headlight assembly, without park lamp, #03.240.700 on lens, three perch mount.
|
Side marker holder with bulb holder. Chromed plastic body, rectangular in shape. Style that houses the reflector/side marker light L0369XB.
|
Side marker light/reflector lens, red. Style that mounts on body in a bezel, that stands out from the body. Light is 1/3 of entire unit, off to one side. This is the plastic insert only, see L0369XA for the chromed housing that captures it.
PLASTICA PER
|
Side marker light/reflector, red - with chromed plastic bezel/holder. Light is 1/3 of entire unit, off to one side, the rest is the reflector.
|
Side marker light/reflector lens, style that mounts on body in a bezel, that stands out from the body. Light is 1/3 of entire unit, off to one side, specify red or amber. This is the plastic insert only, see L0369XA for the chromed housing that captures
|
Side marker light/reflector, amber - with chromed plastic bezel/holder. Light is 1/3 of entire unit, off to one side, the rest is the reflector.
|
Taillight assembly, NOS, amber, 1967
|
Taillight assembly, NOS, amber, 1975
|
Taillight assembly, NOS, red, 1967
|
Taillight assembly, NOS, red, 1975 production,
|
Taillight assembly, Red 1975 homologation. This style does not have reflector in the middle.
|
Taillight base stainless steel ring polished. For 246 Dino & Daytona
| | |
|
|