|
Lights
Bulb holder, Bakelite, NOS, for headlight that require bulbs with 2 side pins, 2 wire.
|
Bulb holder, Bakelite, NOS, for headlight that require bulbs with 2 side pins, 3 wire.
|
Bulb holder, Bakelite, NOS, for headlight that require bulbs with 2 side pins, 4 wire.
|
Bulb, banana shaped bulb for engine compartment lights that function without a lens. These are 20 watt bulbs.
|
Bulb, headlight, NOS, H4 style, 3 spade terminals on base, 100/80 watt, relay required in system for extra wattage
|
Bulb, headlight, round globe style, 45mm diameter metal base functions as bulb holder, clear, 45/40w. Fits Carello headlights.
|
Bulb, headlight, with Bakelite bulb holder, specify bulb holder with or without parking light capability, a combination of L0240X and L0036X
|
Headlight adaptor, NOS, Carello, 6 long pigtail made of 3 wires with bullet connectors at one end and 3 prong Bakelite connectors at other end, for fitting to a more modern headlamp bulb with 3 spade terminals.
|
Headlight assembly, NOS, Carello, 00.508.700 on lens, early 50s style with vertical ribs. Valid for cars up through 1957.
|
Headlight assembly, NOS, Carello, H1 bulb style with bulb shield, #05.485.700 on lens, 7 style, Euro version, right hand drive
|
Headlight assembly, NOS, Carello, H1 bulb style with bulb shield, #03.480.700 on lens, 3 perch mt. w/o parking lamp.
|
Headlight assembly, NOS, tungsten bulb, #07.485.700 on lens, 3 perch style. Sold as each .
|
Headlight assembly, NOS, tungsten bulb, #08.485.700 on lens, with bulb protector, 3 perch mount.
|
Headlight assembly, NOS, Tungsten bulb, Carello 1956-1957, 00.506.700 lens
|
Headlight assembly,NOS, tungsten bulb. 1955-58 cars. Number 00.497.810 on lens.
|
Headlight bucket grommet plug, for attaching wires to bucket, original was white rubber, this one is black.
|
Headlight bucket, NOS, Carello, with out hold-in ring, style with screw-hole at bottom of bucket.
|
Headlight buckets, NOS, Carello, with headlamp hold-in ring and wiring
|
Headlight hold in rings, holds original European style headlights or American style sealed beams into bucket, NOS, Carello, for 170mm/7 size
|
Headlight rim, new manufacture, for Lucas or Carello headlight, 219mm outside diameter/181mm inside diameter, attaching screw at 6:00 oclock
|
Headlight ring, new manufacture, with Carello stamp, nicer than original
|
Headlight ring, no Carello stamp, no chrome, painted, push-on style.
|
Headlight ring, NOS, Carello stamp, push-on style.
|
Headlight switch, NOS, Giulia Spider, dash mount style.
|
L0110XA - Headlight assembly, new manufactured, H4 7" with Carello looking glass but with no script or numbers on lens, three perch mount.
|
License plate light assembly, new manufacture, nicer than original, Carello, slit in glass shroud style, globe shape, correct script
|
License plate light assembly, NOS, Altissimo
|
License plate light assembly, NOS, Hella, rectangular style, fits in hole in bumper on 750 Spider only. Includes new base with light socket, rubber gasket for between base and bezel, new chromed bezel and Hella script lens
|
License plate light assembly, NOS, nicer than original, Carello or Altissimo, slit in glass shroud style, globe shape, correct script, with round gasket
|
License plate light assembly, style for the 750 Series Giulietta Spider. Rectangular in shape, includes new lens, chromed bezel, rubber gasket and base. A complete new manufactured unit.
|
|
|