|
|
Lights
Bezel for side marker lens and its holder. This normally sets into the fender, front or rear and holds the colored lens/reflector and its chromed plastic housing. Specify which fender, as when ordered separately, these are different for each fender.
|
Bulb, banana shaped bulb for engine compartment lights that function without a lens. These are 20 watt bulbs.
|
Bulb, headlight, NOS, H4 style, 3 spade terminals on base, 100/80 watt, relay required in system for extra wattage
|
Bulb, headlight, round globe style, 45mm diameter metal base functions as bulb holder, clear, 45/40w. Fits Carello headlights.
|
Driving light, rectangular style, NOS, Carello, amber glass.
|
Driving light, round style, Carello, NOS, with plastic cover, specify 140mm or 160mm diameter, mounts on front bumper or bumper bracket.
|
Engine compartment light, NOS, #105.85.56.011.00 on back.
|
Headlight assembly, NOS, Carello, H1 bulb style with bulb shield, #03.480.700 on lens,2 bracket & hook mount. w/o parking lamp.
|
Headlight assembly, NOS, Carello, small inside ones, uses Tungsten bulb, Euro version, specify 3 perch mount or 2 brackets and a hook style mount
|
Headlight assembly, NOS, Carello, small inside ones, H1 (halogen bulb), Euro version, 2 bracket and hook mount
|
Headlight buckets, large 7" style, with lever at bottom
|
Headlight hold in rings, holds original European style headlights or American style sealed beams into bucket, NOS, Carello, for 170mm/7 size
|
Headlight hold in rings, holds original European style headlights or American style sealed beams into bucket, NOS, Carello, for 136mm
|
Headlight rings, NOS, large size, stainless steel
|
Headlight rings, NOS, small size.
|
Interior light lens, NOS, specify all white opaque or white opaque with clear bottom lens
|
License plate light, flat style, specify Altissimo, Carello or Olsa, NOS, 80mm X 42mm mounts on bumper, Euro style
|
Light socket only, to repair or restore taillights and front/rear turn signal assemblies, 2 contact style
|
Light socket only, to repair or restore taillights and front/rear turn signal assemblies, single contact style
|
Side marker holder with bulb holder. Chromed plastic body, rectangular in shape. Style that houses the reflector/side marker light L0369XB.
|
Side marker light/reflector lens, red. Style that mounts on body in a bezel, that stands out from the body. Light is 1/3 of entire unit, off to one side. This is the plastic insert only, see L0369XA for the chromed housing that captures it.
PLASTICA PER
|
Side marker light/reflector, red - with chromed plastic bezel/holder. Light is 1/3 of entire unit, off to one side, the rest is the reflector.
|
Side marker light/reflector lens, style that mounts on body in a bezel, that stands out from the body. Light is 1/3 of entire unit, off to one side, specify red or amber. This is the plastic insert only, see L0369XA for the chromed housing that captures
|
Side marker light/reflector, amber - with chromed plastic bezel/holder. Light is 1/3 of entire unit, off to one side, the rest is the reflector.
|
Side marker lights, front, amber, NOS, Carello, 45mm diameter, flat face style
|
Side marker lights, rear, round, 45mm, NOS, Carello, red, flat face
|
Taillight assembly, NOS, Altissimo, Euro version, amber/red/white, right side.
|
Taillight lens, NOS, amber/red/white, Altissimo, right side
|
Taillight lens, NOS, red/red/white, Altissimo, right side
|
Taillight lens, separate amber horizontal lens, style with no chrome trim on edge, right side
|
|
|