|
Engine Compartment
A-arm, adjustable, upper. A terrific way to adjust a non-adjustable front end geometry. Super for alignment on cars previously in an accident.
|
Accelerator linkage at firewall rebuild kit, includes 2 firewall rod rubber bushing, 1 steel/rubber bushing for engine compartment actuator rod, and 1 ball end bolt, twin carburetor models only
|
Accelerator linkage bolt with ball on one end.
|
Accelerator rod from firewall to bell crank. For carburetored cars only.
|
Air filters for all GTV Euro models that have a round metal canister mounted on top of an aluminum plenum. This plenum is bolted to the carburetors, specify dimensions of filter cartridge.
|
Battery cable, negative, as original, 250mm long, correct Italian battery connection, for cars with engine mounted batteries. Specify diameter of cable desired.
|
Battery cable, positive, as original, 1.4 mt. long, correct Italian battery connection, specify with or without smaller red wire for alternator, for cars with engine mounted batteries.
|
Brake booster, OEM, original gold cadmium plate style. This is a new unit, not rebuilt
|
List: $100.00
Price: $93.45
You Save: $6.55 (7 %)
Brake reservoir, new manufacture, round plastic style with metal union at bottom
|
Brake reservoir, NOS, round plastic style with metal union at bottom
|
Bump stop, upper, rectangular shape, flat surface.105.00/41.21.527.00
|
Bushing, rubber one on accelerator actuator shaft/rod on firewall, carb models only, rounded head bolt goes through it, attaches to throttle actuator rod.
|
Carburetor mounts, double style, new OEM manufacturer, factory update, links 1st and 2nd carbs together with a common base, 40mm bore only
|
Carburetor rebuild kit, Weber 40 DCOE, services 2 carbs
|
Carburetor rubber spacer mounts, very high quality, new manufacture, for Weber DCOE carbs or 40mm Dellorto carbs take DCOE style, made by Pirelli.
|
Carburetor rubber spacer mounts, very high quality new manufacture for 45 DCOE
|
Carburetor, Weber, 45 DCOE, new, less Alfa linkage between carbs, uses your old Solex or Weber linkage to fit
|
Clutch hose, new manufacture, very high quality
|
Cotter Pin & Bracket for 9mm strapping
|
Crankshaft seals, front and rear, new manufacture, very high quality
|
Differential limited-slip assembly, complete, new manufacture, specify coarse or fine spline shafts and diameter at spline end, more robust than 2000 c.c. version, designed to fit 1300, 1600, 1750 and 2000 c.c. differential housing.
|
Differential support bushings, verify dimensions to check fit.
|
Driveshaft center bearing carrier, NOS, 105.48.15.127.00
|
Engine gasket set, complete, very high quality, asbestos-free modern, high-tech materials. 2000 c.c., silk-screened sealant on the large gaskets.
|
Engine gasket set, very high quality style gaskets, silk-screened style sealant wherever applicable, includes crankshaft seals front and rear, perfect for either 1750 or 2000 engines. Order the appropriate head gasket separately to match this set.
|
Engine, Twin-spark, 2000 cc, good used motor from a running car in Italy, includes the F.I. airflow meter, alternator, and starter.
|
Exhaust pipes and muffler, front section. Heavier all the way around than the original. Made in Italy.
|
Fan blade, high performance, Euro style, requires less HP to turn, 6 blade, white plastic
|
Firewall grommet, heater hose.
|
Fuel filter assembly/Fuel pressure regulator, glass bowl version, NOS, FISPA, specify if uses banjo fittings, or hoses with hose clamps.
|
|
|